Sixteen architectural films across four series — solar control, one-way vision, energy saving and metal sputtering. Specified the way you actually spec: by VLT and SHGC. Supplied and installed by Juxtapose across Mumbai, Pune, Bangalore, Hyderabad and Delhi.
The workhorse series. Metallised aluminium construction, six VLT points from near-blackout to daylight-neutral — one family that can spec an entire façade.
TSER 88% · SHGC 0.06 · VLT 2 ± 1%
| Visible light transmission | 2 ± 1 % |
| Infrared rejection | 93 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 88 % |
| TSER (1170) | 94 % |
| Shading coefficient | 0.07 |
| Solar heat gain coefficient | 0.06 |
| Reflectance — internal / external | 81% / 89% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 85% · SHGC 0.14 · VLT 9 ± 2%
| Visible light transmission | 9 ± 2 % |
| Infrared rejection | 93 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 85 % |
| TSER (1170) | 86 % |
| Shading coefficient | 0.16 |
| Solar heat gain coefficient | 0.14 |
| Reflectance — internal / external | 71% / 73% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 78% · SHGC 0.23 · VLT 17 ± 2%
| Visible light transmission | 17 ± 2 % |
| Infrared rejection | 90 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 78 % |
| TSER (1170) | 77 % |
| Shading coefficient | 0.26 |
| Solar heat gain coefficient | 0.23 |
| Reflectance — internal / external | 54% / 60% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 63% · SHGC 0.44 · VLT 38 ± 2%
| Visible light transmission | 38 ± 2 % |
| Infrared rejection | 69 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 63 % |
| TSER (1170) | 56 % |
| Shading coefficient | 0.49 |
| Solar heat gain coefficient | 0.44 |
| Reflectance — internal / external | 27% / 32% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 52% · SHGC 0.61 · VLT 59 ± 2%
| Visible light transmission | 59 ± 2 % |
| Infrared rejection | 57 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 52 % |
| TSER (1170) | 39 % |
| Shading coefficient | 0.68 |
| Solar heat gain coefficient | 0.61 |
| Reflectance — internal / external | 16% / 18% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 41% · SHGC 0.71 · VLT 66 ± 2%
| Visible light transmission | 66 ± 2 % |
| Infrared rejection | 57 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 41 % |
| TSER (1170) | 29 % |
| Shading coefficient | 0.80 |
| Solar heat gain coefficient | 0.71 |
| Reflectance — internal / external | 9% / 11% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
Daytime privacy without losing the outward view. Reflective exterior face, clear sightline from inside — for street-facing glass, ground-floor offices and meeting rooms on the glass line.
TSER 80% · SHGC 0.21 · VLT 16 ± 2%
| Visible light transmission | 16 ± 2 % |
| Infrared rejection | 90 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 80 % |
| TSER (1170) | 79 % |
| Shading coefficient | 0.23 |
| Solar heat gain coefficient | 0.21 |
| Reflectance — internal / external | 58% / 57% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 83% · SHGC 0.22 · VLT 11 ± 2%
| Visible light transmission | 11 ± 2 % |
| Infrared rejection | 88 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 83 % |
| TSER (1170) | 78 % |
| Shading coefficient | 0.24 |
| Solar heat gain coefficient | 0.22 |
| Reflectance — internal / external | 58% / 26% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 81% · SHGC 0.28 · VLT 13 ± 2%
| Visible light transmission | 13 ± 2 % |
| Infrared rejection | 83 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 81 % |
| TSER (1170) | 72 % |
| Shading coefficient | 0.32 |
| Solar heat gain coefficient | 0.28 |
| Reflectance — internal / external | 8% / 25% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 88% · SHGC 0.22 · VLT 2 ± 1%
| Visible light transmission | 2 ± 1 % |
| Infrared rejection | 93 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 88 % |
| TSER (1170) | 78 % |
| Shading coefficient | 0.25 |
| Solar heat gain coefficient | 0.22 |
| Reflectance — internal / external | 5% / 25% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
Low interior reflectance and balanced VLT for buildings chasing cooling-load numbers — HVAC relief on large glazed elevations without the mirror-box look.
TSER 80% · SHGC 0.37 · VLT 13 ± 2%
| Visible light transmission | 13 ± 2 % |
| Infrared rejection | 80 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 80 % |
| TSER (1170) | 63 % |
| Shading coefficient | 0.41 |
| Solar heat gain coefficient | 0.37 |
| Reflectance — internal / external | 5% / 8% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 67% · SHGC 0.40 · VLT 25 ± 2%
| Visible light transmission | 25 ± 2 % |
| Infrared rejection | 73 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 67 % |
| TSER (1170) | 60 % |
| Shading coefficient | 0.45 |
| Solar heat gain coefficient | 0.40 |
| Reflectance — internal / external | 7% / 14% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 65% · SHGC 0.40 · VLT 31 ± 2%
| Visible light transmission | 31 ± 2 % |
| Infrared rejection | 71 ± 3 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 65 % |
| TSER (1170) | 60 % |
| Shading coefficient | 0.45 |
| Solar heat gain coefficient | 0.40 |
| Reflectance — internal / external | 24% / 28% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
Spectrally selective sputtered coatings — the premium tier. High infrared rejection at higher VLT, low reflectance both sides. For daylight-first architecture that still has to hit thermal targets.
TSER 70% · SHGC 0.33 · VLT 15 ± 2%
| Visible light transmission | 15 ± 2 % |
| Infrared rejection | 80 ± 2 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 70 % |
| TSER (1170) | 67 % |
| Shading coefficient | 0.37 |
| Solar heat gain coefficient | 0.33 |
| Reflectance — internal / external | 7% / 14% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 63% · SHGC 0.42 · VLT 35 ± 2%
| Visible light transmission | 35 ± 2 % |
| Infrared rejection | 80 ± 2 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 63 % |
| TSER (1170) | 58 % |
| Shading coefficient | 0.48 |
| Solar heat gain coefficient | 0.42 |
| Reflectance — internal / external | 12% / 15% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
TSER 51% · SHGC 0.49 · VLT 50 ± 2%
| Visible light transmission | 50 ± 2 % |
| Infrared rejection | 80 ± 2 % |
| UV rejection | ≥99 % |
| TSER (ASTM 161H) | 51 % |
| TSER (1170) | 51 % |
| Shading coefficient | 0.55 |
| Solar heat gain coefficient | 0.49 |
| Reflectance — internal / external | 10% / 12% |
| Thickness · structure | 2 mil · 2-ply |
Values manufacturer-declared by INFLEX, measured on 3 mm clear float glass. Independent test reports and full datasheet (incl. K-value) on request.
ML01 · ML10 · ML15 · AS15
The heat-load face. Prioritise TSER and low SHGC; accept deeper tint.DS · NS · BS · GS
Daytime privacy with an outward view. Pair with manifestation film where code requires.ML60 · ML65 · AS50
Hold the light, still shed infrared. Sputtered AS50 keeps reflectance low both sides.ES15 · ES25 · ES30
Energy-saving series for HVAC relief on large glazed elevations.We supply and install 3M, Hanita and Garware sun-control and heat-control films alongside the INFLEX range — and we'll tell you straight which film fits your spec and budget.
In the INFLEX range, AS15 metal sputtering rejects 80% of infrared at 15% VLT; for maximum total rejection ML01 reaches 88% TSER. For daylight-first spaces, AS50 holds 80% IR rejection at 50% VLT.
VLT is the share of visible light the glass still transmits. SHGC is the fraction of solar heat that gets through — lower is cooler. TSER is total solar energy rejected — higher is cooler. Architects typically spec by VLT for appearance and SHGC for thermal performance.
Yes — all films in the range are 2-mil interior-applied and suit annealed, toughened and laminated glass. Absorption-heavy films on some IGU configurations need a thermal-stress check; send the glass spec with your enquiry and we confirm suitability.
Both. Juxtapose is an INFLEX Platinum Channel Partner and installs with in-house teams across Mumbai, Pune, Bangalore, Hyderabad and Delhi.
Yes — we supply and install 3M, Hanita and Garware sun-control and heat-control films alongside the INFLEX range, and will recommend whichever film fits the spec and budget.
Pricing is per project — it depends on film, glass area, access and city. Send areas and orientation through the enquiry form and estimation responds with a quote.
Send orientation, approximate areas and the glass spec if you have it. Estimation comes back with film options and a quote.